Icom IC-2800H User Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
39
7
MEMORY/CALL CHANNELS
D Programming a call channel via the
microphone
The HM-98 microphone can also be used to pro-
gram a call channel.
q Select the desired band with [BAND].
w Select VFO mode with [VFO].
e Set the desired frequency.
Set other data (e.g. offset frequency, duplex direction, subaudible
tone frequency, etc.), if required.
r Push [FUNC] then [E MW] momentarily to indicate mem-
ory channels.
Do not hold [MW] for more than 0.5 sec., otherwise the memory
channel will overwrite the selected memory channel.
t Push [Y] or [Z] to select the call channel.
“C” appears when the call channel is selected.
y Push [FUNC] then [E MW] for 2 sec. to program.
D Transferring call channel contents
The call channels can be transferred in a similar manner to
memory channel transferring.
q Select call channel with the desired band’s [M/C].
Push [CHG/L] if [M/C] is not displayed.
“C” appears when the call channel is selected.
w Push [(S.MW)MW] for 2 sec. to transfer.
Push [CHG/L] if [S.MW] is not displayed.
D Transferring call channel contents via the
microphone
q Select the desired band with [BAND].
w Push [
(MR)CALL] for 2 sec. to select the desired band’s call
channel.
“C” appears when the call channel is selected.
e Push [FUNC] then [E MW] for 2 sec. to transfer.
MW
A
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 87 88

Comments to this Manuals

No comments