Icom IC-2800H User Manual Page 80
- Page / 88
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
■ Getting started
D This cloning software is designed to perform data setting
and cloning for the IC-2800H DUAL BAND FM transceiver.
D HELP WINDOW: Each item has a help window to describe
functions and operation.
■ System requirements
To use this program, the following hardware and software are
required:
•IBM PC/AT compatible computer
•An RS-232C serial port
•Microsoft
®
Windows
®
95 or Microsoft
®
Windows
®
98
•Intel i486DX4 processor or faster
•At least 16 MB RAM
•At least 640 × 480 pixel display
•OPC-478 CLONING CABLE
■ Software installation
NOTE: Before using the program, make a backup copy of
the original disk. After making a backup copy, keep the
original disk in a safe place.
NOTE: Depending on your Windows
®
system files, the PC
may require rebooting. In this case, repeat the installation
from the beginning.
q Boot up Windows.
•Quit all applications when Windows is running.
w Insert backup disk into the appropriate floppy drive.
e Select ‘Run’ from the [Start] menu.
r Type the setup program name with full path name, then
press the [Enter] key. (A:\SETUP [Enter])
t Follow the prompts.
y Program group ‘CS-2800’ appears in the ‘Programs’ folder
of the start menu.
76
16
CS-2800 CLONING SOFTWARE
optional CS-2800 and OPC-478
IC-2800H
To [430(440)
MHz SP]
to an RS-232C
port
DB9 female plug
(incl. level converter circuit)
Personal
computer
OPC-478
■ Connections
All cloning operations are performed from
the computer’s keyboard—the operation re-
quired on the transceiver side is:
while pushing the microphone [UP] switch +
the 4th switch from the top on the left side,
push [POWER] on the controller.
- INSTRUCTION MANUAL 1
- FOREWORD 2
- EXPLICIT DEFINITIONS 2
- CAUTIONS 2
- For LCD display 3
- For U.S.A. only 3
- TABLE OF CONTENTS 4
- SUPPLIED ACCESSORIES 5
- ■ Function display 8
- ■ Basic function menu 10
- PANEL DESCRIPTION 11
- ■ Main unit 12
- D DATA JACK PIN ASSIGNMENTS 13
- ■ HM-98 microphone* 14
- ■ HM-97/118 microphone 17
- INSTALLATION 18
- ■ Battery connection 19
- ■ Mounting the remote 19
- ■ DC power supply connection 20
- ■ Cable connection 20
- ■ Antenna installation 21
- FREQUENCY SETTING 22
- ■ Lock functions 23
- ■ Using the tuning dial 24
- ■ Using the [Y]/[Z] keys 24
- ■ Setting a tuning step 25
- ■ Using the keypad 26
- BASIC OPERATION 27
- ■ Monitor function 28
- ■ Audio mute function 28
- ■ Transmitting 28
- ■ Selecting output power 29
- ■ One-touch PTT function 29
- REPEATER OPERATION 30
- D DTMF tones 31
- ■ 1750 Hz tone 32
- ■ Subaudible tone 33
- ■ Offset frequency 34
- ■ Auto repeater function 35
- MEMORY/CALL CHANNELS 36
- ■ Programming after selection 37
- ■ Transferring memory 37
- ■ Programming during 38
- ■ Memory clear 40
- ■ Alphanumeric display 41
- ■ Call channel 42
- SCRATCH PAD MEMORY 44
- ■ Transferring scratch pad 45
- SCAN OPERATION 46
- ■ Full/programmed scan 47
- ■ Selecting scan edges 48
- ■ Memory scan 49
- ■ Skip channel setting 50
- ■ Scan resume condition 50
- BAND SCOPE 51
- PRIORITY WATCH 52
- SUBAUDIBLE TONE OPERATION 54
- ■ Pocket beep operation 56
- ■ Tone scan 57
- DTMF MEMORY 58
- ■ Transmitting a DTMF code 59
- ■ DTMF speed 60
- WIRELESS OPERATION 61
- ■ EX-1759 installation 62
- ■ HM-90 switches 63
- ■ Microphone address 66
- OTHER FUNCTIONS 67
- ■ Auto power-off function 68
- ■ Cooling fan 68
- ■ Squelch delay 69
- ■ Sub band mute 69
- ■ Sub band busy beep 70
- ■ Automatic RF attenuator 70
- ■ Memory name indication 71
- ■ HM-98 [F-1]/[F-2] keys 71
- ■ HM-97/118 [UP]/[DN] keys 72
- ■ Display contrast 72
- ■ Display brightness 73
- ■ Indication type 73
- ■ My call function 73
- ■ Packet operation 74
- D 1200 bps packet operation 75
- ■ Video monitor function 77
- ■ Demonstration display 78
- ■ AM/FM narrow mode 78
- ■ Fuse replacement 78
- ■ Partial reset 79
- ■ All reset 79
- CS-2800 CLONING SOFTWARE 80
- ■ COM port/call sign setting 81
- ■ Edit menu 82
- ■ DTMF autodial 82
- ■ Common settings 83
- ■ Exiting cloning mode 83
- TROUBLESHOOTING 84
- SPECIFICATIONS 86
- D Receiver 87
- Count on us! 88
Related products and manuals for Boating Accessories Icom IC-2800H
Boating Accessories Icom IC-M90 User Manual
(40 pages)
(40 pages)
Boating Accessories Icom IC-M802 User Manual
(79 pages)
(79 pages)
Boating Accessories Icom IM422 User Manual
(64 pages)
(64 pages)
Boating Accessories Icom IC-F210 User Manual
(24 pages)
(24 pages)
Boating Accessories Icom IC-208H User Manual
(96 pages)
(96 pages)
Boating Accessories Icom IC-F60V User Manual
(48 pages)
(48 pages)
Boating Accessories Icom IC-V8 User Manual
(68 pages)
(68 pages)
Boating Accessories Icom IC-M422 User Manual
(64 pages)
(64 pages)
Boating Accessories Icom IC-M505 User Manual
(80 pages)
(80 pages)
© 2020, manymanuals.com. All rights reserved. | 1.181 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals