Icom IC-2800H User Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
70
15
OTHER FUNCTIONS
Packet operation
D Data speed
For packet operation, the transceiver can be set to one of two
data speeds: 1200 bps (default) or 9600 bps.
q Push [(DISP)SET] for 2 sec. to enter set mode.
Push [CHG/L] if [(DISP)SET] is not displayed.
w Push [Y] or [Z] to select the ‘Packet BPS’ item.
Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to select the desired
data speed.
r Push [ï] to exit set mode.
q Push [F SET] to enter set mode.
w Push [F SET] or [G ENT] to select the ‘Packet
BPS’ item.
e Push [Y] or [Z] to select the desired data
speed.
r Push [E CLR] to exit set mode.
For 1200 bps operation—
Disconnect the microphone plug from the microphone
connector during data transmission, otherwise the data
signal and voice signal are simultaneously transmitted.
For 9600 bps operation—
When the transceiver is set for 9600 bps data transmis-
sion in set mode, the microphone signal is automatically
cut. Therefore, it is not necessary to disconnect the mi-
crophone plug from the connector in this case.
When pushing [PTT] during data transmission, data trans-
mission is interrupted and voice signals have priority.
ï
Y
Z
SET
Auto Power-Off
OFF
Auto
1200
Long
1
Cooling Fan
Packet BPS
Squelch Delay
HM-90 Address
SET
B
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 87 88

Comments to this Manuals

No comments