Icom IC-2800H User Manual Page 68
- Page / 88
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
64
15
OTHER FUNCTIONS
■ Auto power-off function
The transceiver can be set to automatically turn OFF after a
specified period in which no operations are performed.
2 hours, 1 hour, 30 min. and OFF can be specified. The spec-
ified period is retained even when the transceiver is turned
OFF by the auto power-off function. To cancel the function,
select “OFF” in step e below.
q Push [
(DISP)SET] for 2 sec. to enter set mode.
•Push [CHG/L] if [(DISP)SET] is not displayed.
w Push [Y] or [Z] to select the ‘Auto Power-Off’ item.
•Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to select the desired auto
power-off time or turn the
function OFF.
r Push [ï] to exit set mode.
q Push [F SET] to enter set mode.
w Push [F SET] or [G ENT] to select the ‘Auto
Power-Off’ item.
e Push [Y] or [Z] to select the desired auto
power-off time or turn the function OFF.
r Push [E CLR] to exit set mode.
■ Cooling fan
The transceiver has a heatsink and cooling fan to radiate
heat. The cooling fan automatically turns ON while transmit-
ting and remains ON for 2 min. after transmitting. The cool-
ing fan can be activated continuously, if desired.
q Push [
(DISP)SET] for 2 sec. to enter set mode.
•Push [CHG/L] if [(DISP)SET] is not displayed.
w Push [Y] or [Z] to select the ‘Cooling Fan’ item.
•Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to set the cooling fan to
automatic (“Auto”) or contin-
uous (“ON”).
r Push [ï] to exit set mode.
q Push [F SET] to enter set mode.
w Push [F SET] or [G ENT] to select the ‘Cooling
Fan’ item.
e Push [Y] or [Z] to set the cooling fan to auto-
matic (“Auto”) or continuous (“ON”).
r Push [E CLR] to exit set mode.
ï
Y
Z
SET
Operation Beep
ON
OFF
OFF
OFF
Auto
Tx T.O.T.
Auto Repeater
Auto Power-Off
Cooling Fan
ï
Y
Z
SET
Auto Power-Off
OFF
Auto
1200
Long
1
Cooling Fan
Packet BPS
Squelch Delay
HM-90 Address
SET
B
SET
B
- INSTRUCTION MANUAL 1
- FOREWORD 2
- EXPLICIT DEFINITIONS 2
- CAUTIONS 2
- For LCD display 3
- For U.S.A. only 3
- TABLE OF CONTENTS 4
- SUPPLIED ACCESSORIES 5
- ■ Function display 8
- ■ Basic function menu 10
- PANEL DESCRIPTION 11
- ■ Main unit 12
- D DATA JACK PIN ASSIGNMENTS 13
- ■ HM-98 microphone* 14
- ■ HM-97/118 microphone 17
- INSTALLATION 18
- ■ Battery connection 19
- ■ Mounting the remote 19
- ■ DC power supply connection 20
- ■ Cable connection 20
- ■ Antenna installation 21
- FREQUENCY SETTING 22
- ■ Lock functions 23
- ■ Using the tuning dial 24
- ■ Using the [Y]/[Z] keys 24
- ■ Setting a tuning step 25
- ■ Using the keypad 26
- BASIC OPERATION 27
- ■ Monitor function 28
- ■ Audio mute function 28
- ■ Transmitting 28
- ■ Selecting output power 29
- ■ One-touch PTT function 29
- REPEATER OPERATION 30
- D DTMF tones 31
- ■ 1750 Hz tone 32
- ■ Subaudible tone 33
- ■ Offset frequency 34
- ■ Auto repeater function 35
- MEMORY/CALL CHANNELS 36
- ■ Programming after selection 37
- ■ Transferring memory 37
- ■ Programming during 38
- ■ Memory clear 40
- ■ Alphanumeric display 41
- ■ Call channel 42
- SCRATCH PAD MEMORY 44
- ■ Transferring scratch pad 45
- SCAN OPERATION 46
- ■ Full/programmed scan 47
- ■ Selecting scan edges 48
- ■ Memory scan 49
- ■ Skip channel setting 50
- ■ Scan resume condition 50
- BAND SCOPE 51
- PRIORITY WATCH 52
- SUBAUDIBLE TONE OPERATION 54
- ■ Pocket beep operation 56
- ■ Tone scan 57
- DTMF MEMORY 58
- ■ Transmitting a DTMF code 59
- ■ DTMF speed 60
- WIRELESS OPERATION 61
- ■ EX-1759 installation 62
- ■ HM-90 switches 63
- ■ Microphone address 66
- OTHER FUNCTIONS 67
- ■ Auto power-off function 68
- ■ Cooling fan 68
- ■ Squelch delay 69
- ■ Sub band mute 69
- ■ Sub band busy beep 70
- ■ Automatic RF attenuator 70
- ■ Memory name indication 71
- ■ HM-98 [F-1]/[F-2] keys 71
- ■ HM-97/118 [UP]/[DN] keys 72
- ■ Display contrast 72
- ■ Display brightness 73
- ■ Indication type 73
- ■ My call function 73
- ■ Packet operation 74
- D 1200 bps packet operation 75
- ■ Video monitor function 77
- ■ Demonstration display 78
- ■ AM/FM narrow mode 78
- ■ Fuse replacement 78
- ■ Partial reset 79
- ■ All reset 79
- CS-2800 CLONING SOFTWARE 80
- ■ COM port/call sign setting 81
- ■ Edit menu 82
- ■ DTMF autodial 82
- ■ Common settings 83
- ■ Exiting cloning mode 83
- TROUBLESHOOTING 84
- SPECIFICATIONS 86
- D Receiver 87
- Count on us! 88
Related products and manuals for Boating Accessories Icom IC-2800H
Boating Accessories Icom IC-M90 User Manual
(40 pages)
(40 pages)
Boating Accessories Icom IC-M802 User Manual
(79 pages)
(79 pages)
Boating Accessories Icom IM422 User Manual
(64 pages)
(64 pages)
Boating Accessories Icom IC-F210 User Manual
(24 pages)
(24 pages)
Boating Accessories Icom IC-208H User Manual
(96 pages)
(96 pages)
Boating Accessories Icom IC-F60V User Manual
(48 pages)
(48 pages)
Boating Accessories Icom IC-V8 User Manual
(68 pages)
(68 pages)
Boating Accessories Icom IC-M422 User Manual
(64 pages)
(64 pages)
Boating Accessories Icom IC-M505 User Manual
(80 pages)
(80 pages)
© 2020, manymanuals.com. All rights reserved. | 1.729 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals