Icom IC-2800H User Manual Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
45
9
SCAN OPERATION
Memory scan
q Select memory mode with the desired band’s [M/C].
Push [CHG/L] if [M/C] is not displayed.
•“! appears when memory mode is selected.
w Make sure the squelch is set to the threshold point.
e Push [
(M/C)SCN] for 2 sec. to enter the scan screen.
If the pocket beep function is activated, the transceiver automat-
ically selects the tone squelch function when the scan screen is
selected.
r Push [MEM] momentarily to start the scan.
Decimal point and!” flash while scanning.
To change the scanning direction, rotate the desired band’s tun-
ing dial.
t To stop the scan, push [MEM] again.
y Push [
(MAIN)í] for 2 sec. to exit the scan screen.
q Select the desired band with [BAND].
w Select memory mode with [MR].
e Push [SQLY] or [SQLZ] to set the squelch to
the threshold point.
r Push [w SCAN] momentarily or [Y]/[Z] for 2
sec. to start memory scan.
Decimal point and!” flash while scanning.
t Push [Y], [Z] or [E CLR] to cancel the scan.
At least 2 memory channels must be programmed for
memory scan to start.
Y Z
M
-
L
SCAN
144.0-146.0
Resume 15s
145.320
12
MAIN
43
3.000
12
í
MAIN
PRIO
MEM
TON
Res
SEL
SCP
MAIN
TS
V/M
H
SCN
M/C
LOW
MONI
MID-LO
M
Page view 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 87 88

Comments to this Manuals

No comments